[yuyaya]

No guitar neck profiles are more distinguishable than the neck profiles employed on the Gibson Explorer models of today. The more traditional '50s neck profile is the thicker, more rounded contour, emulating the neck shapes of Gibson's iconic models of the late 1950s.

The '60s neck profile is considered the more modern, slim-tapered contour most commonly associated with the Gibson models of the early 1960s. The neck on Gibson's Explorer has the best of both worlds—it is a hybrid between the '50s rounded contour and the '60s slim-taper profile. As with all Gibson necks, it is machined in Gibson's rough mill using wood shapers to make the initial cuts.

Once the fingerboard gets glued on, the rest—including the final sanding—is done by hand. That means there are no two necks with the exact same dimensions. So while it still has the basic characteristics of its respective profile, each neck will be slightly different, with a distinct but traditional feel.

*removed*