[floydmoline]

the bottom of that yellow guy had issues i had to sand out i put the 3rd coat on a little bit too soon and the paint started to lift........ the crackles that makes one clear coated look cool, but not what i was going for here lol...... next step i do is create and print of decals, i use waterslide decals and an ink jet, there are better ways of doing this but also significantly more expensive, such as screen printing, hand painted boxes are ok for Zvex, but not my bag..... the waterslide decals do tend to show the decal lines when an insufficient coat of clear is put on, but tht is something i can live with for now...... after printing the decals you have to spray a clear coat on them, i made this mistake the first time...... ink jet ink, will readily run even when dry when introduced to water so a coating of eurathane or krylon clear is needed and stops the run, but makes putting decals on a white box interesting should we say, since the clear coat ambers a bit and shows on white, there are ways around this but be prepared to be spraying clear on the finished box for a while lol