View Single Post
Old
  (#3)
aakicee is Offline
n00b!
aakicee is on a distinguished road
 
aakicee's Avatar
 
Posts: 1
Join Date: Apr 2015
   
Default 04-22-2015, 02:56 AM

Lay the pre-built neck out on the slab of wood in the center so that the 18th fret is even and squared with the top of the slab using your framing square. Draw around the neck pocket, set the neck aside. Continue the lines all the way down through the body to the end of the slab. Now draw the Explorer design on the slab with a pencil using the lines for reference.
  
Reply With Quote