View Single Post
Old
  (#2)
Fender_man is Offline
n00b!
Fender_man is on a distinguished road
 
Fender_man's Avatar
 
Posts: 15
Join Date: Dec 2007
   
Default 07-14-2011, 08:47 PM

The problem you’re experiencing mainly stems from the low tuning you’re using and how it relates to the scale length of your guitar. Most (though certainly not all) standard guitars have scale lengths that range from 24 3/4 (as on your Epiphone Les Paul) to 25-1/2 inches, and they are designed for string diameters that range from .008 to .056. By comparison, a baritone guitar tuned to low A would have a scale length of about 30 inches— more than five inches longer than the scale length on your Paul—and use strings with diameters that range from .013 to .070 or even .080. Under the circumstances, you can probably see why your Les Paul is experiencing buzzing and poor string response, even with heavier-gauge strings.

The most important suggestion I can offer is to have your guitar's nut recut to compensate for the larger-diameter strings. This should reduce fret buzz and help your strings retain the snappy feel you like. In addition, have the truss rod adjusted until it’s just shy of dead straight. This, too, will reduce buzzing and improve string responsiveness. Lastly, you might want to try even heavier gauge strings to improve not only responsiveness but also tone.

These recommendations should alleviate the problems you're having. With that said, given the realities of scale length and your low tuning, I don’t think that they will make your guitar’s performance perfect, just better.


I have a big Hardon 4 Guitars!
  
Reply With Quote