Bugera Guitar Amps: The Soul of Valves
 

http://www.gear-vault.com/wp-content...ugera-1960.jpg

Bugera is the hottest new entry in the All-Valve Guitar Amp Arms Race; 1960, 1990, BVP5500, BTX36000; the answer to tone-crazy guitarists' and bassists' prayers. The tonal possibilities are simply endless.

1960 Classic 150 Watt Hi-Gain Valve Amplifier Head

# Hand-built 150-Watt hi-gain amplifier driven by 4 x EL34 valves
# Vintage preamp design from the '60s featuring 3 x ECC83 valves for terrifying punch and mind-blowing gain
# 4 input connectors allow channel 1 and 2 to be linked via patch cable to mix the different tonal characters of each channel for ultimate tone
# Vintage Equalizer section with dedicated Bass, Mid, Treble and Presence controls
# Impedance switch (4, 8 and 16 Ohms) to match virtually any speaker cabinet
# FX Loop with dedicated Level switch and true Bypass function
# High-quality components and exceptionally rugged construction ensure long life

--
http://www.gear-vault.com/wp-content...gera-19601.jpg

1990 Classic 120 Watt Hi-Gain Dual Reverb Valve Amplifier Head

# Hand-built 120-Watt hi-gain amplifier driven by 4 x 5881 valves
# Classic 2-channel preamp design (Clean, Lead) featuring 3 x ECC83 valves for terrifying punch and mind-blowing gain
# Integrated high-class reverb with dedicated Reverb control for each channel
# Vintage Equalizer section with dedicated Bass, Mid, Treble and Presence controls
# Power switch to select between 100 or 50-Watt output power
# Impedance switch (4, 8 and 16 Ohms) to match virtually any speaker cabinet
# FX Loop with dedicated Level control
# Frequency compensated Recording output
# Heavy-duty footswitch for Channel selection and Reverb included
# High-quality components and exceptionally rugged construction ensure long life

--
http://www.gear-vault.com/wp-content...ra-bvp5500.jpg

BVP5500 Classic 550-Watt Valve Bass Amplifier Head

# Classic 550-Watt Valve Bass Amplifier Head with Valve Gain Control and 9-Band Graphic EQ
# Powerful 550-Watt valve bass amplifier head for classic sound and performance
# 4 x 12AX7 valves give you the ultimate sound and feel only valves can provide
# Valve Gain controls the dynamics and tonal response of the power amp to deliver anything from punchy to thick and compressed sounds
# Ultra-musical 9-band graphic EQ for total frequency control
# Dedicated Bass, Mid, Treble and additional Mid frequency control enable ultimate sound shaping
# Bright function for brilliant sound enhancement, even with heavy compression
# Switchable Ultra Low and Ultra High function for ultimate tone
# Dual footswitch for Mute and EQ functions included
# Balanced XLR DI output for direct connection to your mixing console
# Switchable Tuner output works either as a tuner connection or a live monitor feed
# Effects Loop for external effects devices (stomp boxes, rack effects, etc.)
# Power Amp input and Preamp output connectors allow you direct access to the power amp and a signal tap from the preamp section for even greater versatility
# 3 speaker outputs: two 1/4" jacks and a professional speaker connector (compatible with Neutrik Speakon connectors)
# Integrated limiter and active, temperature-controlled cooling system for ultimate protection

--
http://www.gear-vault.com/wp-content...a-btx36000.jpg

BTX36000 3,600 Watt True Bi-Amping Stereo Bass Amplifier Head

# 3,600-Watt True Bi-Amping Stereo Bass Amplifier Head with Compressor and Graphic EQ
# Extremely powerful 3,600-Watt true bi-amping stereo bass amplifier
# Ultra-flexible 2 x 1,800-Watt stereo or 3,600-Watt bridged mode
# Integrated Crossover with dedicated Frequency and Balance controls for bi-amping operation
# Active, ultra-musical 9-band graphic EQ for total sound control
# Dedicated Bass, Mid, Treble and additional Mid frequency control enable ultimate sound shaping
# Switchable Ultra Low and Ultra High processing for ultimate tone
# Integrated Compressor increases sustain and smoothes out volume peaks when playing dynamic slaps
# Bright function for brilliant sound enhancement, even with heavy compression
# Switchable Limiter for ultimate volume without distortion plus total system protection
# Balanced DI outputs with pre/post routing for direct connection to your mixing console
# Tuner outputs on front and rear panel
# Stereo Effects loop for external effects devices (stomp boxes, rack effects, etc.)
# Dual footswitch for graphic EQ and Effects loop included
# Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers
# High-quality components and exceptionally rugged construction ensure long life