General Amp Settings
I wanted to make a SETTINGS thread for people to post there setting on, or any settings you know of..
01. Name the Amp used 02. Any effects used?? if so name them and there settings 03. The settings.. tre bass mid, presence, and any other type of setting 04. Tube or solid state amp? 05. What are the watts of the amp? 06. Guitar used (active pickups or not) may change the tone alot, so this is important 08. Reference, tell what or who it sounds like.. (eg. grunge/alternative setting, sounds like "Blackhole sun".) and if there is anything else add it.. |
Re: General Amp Settings
I'll go first.. these are my current boogie settings
01. The amp used is a Mesa dual rectifier roadster with 4x12 vintage 30's 02. i use a boss mt-2 layered over my distortion channel.. the settings are; not o'clock... i use 1 - 10 Level - 5 Low - 6.5 High - 6.5 Mid Freq - 3.5 Middle - 2.5 Distortion - 3 03. okay the acctual amp settings;(remember i use 1 - 10) First it's on 50 watt setting On Tube Tracking Reverb is set to 5 On BOLD Output - 5 Solo - 7 Master - 4 - 5 Presence - 7 Bass - 5 Mid - 8 Treb - 7 Gain - 6 - 7 04. Tube amp 05. it is a 100watt amp but gives you the option to play in 50watt, i like to use 50 watt because it lowers the headroom of the amp and gives you more responce from you gain knob.. 06. Guitar used - usually my Shecter omen.. non active pickups, just good ol' regular ones.. 08. Not to sure who it sounds like, but it is a very thick heavy setting.. A Metal setting.. I play technical melodic death metal, lol if that makes sence.. and this is my practice setting. live i would cut the mid a bit , cut the bass, almost to 0.. and thats it.. Oh by the way, yes there is no 7.... i can't count that high, lol i guess i forgot it... Enjoy the settings |
Re: General Amp Settings
come on guys post some settings for everyone to play around with
|
Re: General Amp Settings
Quote:
|
Re: General Amp Settings
I'm playing with the HD147 right now, the settings that I am using are preset. I have another RG100ES coming, I can post some settings off that.
|
Re: General Amp Settings
01. Fender FM212R
02. My effects in my sig, but my uber metal is my main distortion. 03. treble - 6 mids - 5 bass - 10 ( ON THE UBER METAL) Same as above with gain up to 10 04. solid state 05. 100W 06. Epiphone les paul with stock pu's and a peavey tracer with a duncan distortion 08. foo fighters, coheed and cambria, megadeth, metallica, thrice |
Re: General Amp Settings
Line 6 spider II 120 watt solid state
treble - 3 mids - 6 bass - 8 reverb 4 |
Re: General Amp Settings
Quote:
|
Re: General Amp Settings
Quote:
|
Re: General Amp Settings
i have nominal settings
1. peavey windsor 100W head (typically i pull the outside tubes to drop it to 50W for guitar, and it extends the life of my tubes...... i only have 1 pair in so the other pair i can have as back-ups lol) 2. first in chain VOX V847 wah, only has one setting on or off, but i generally use it for a filter, only as a wah for solos.... if i want to get real extravigant. 2nd in chain the tone bender i just built, it's rather limiting atm, i need to do some mods on it, it's very tonebendery, but not very useful since it eats bass like no other pedal i have used, so i need to tweek the input and output caps, and possibly add a filter cap on the output to tame the treble, it has a great sound...... with the attack down it has a spirit in the sky sound to it, with the attack up full it's full on guess who american woman intro solo, fully saturated and sustains for eons last in chain is a script era MXR distortion plus clone, modded, the distortion pot i dropped from 500k to 250k so it don't get as clean as it does stock, but it lets alot more bass through, and has more max gain, i normally set the distortion to between 50% and 75% and output to unity, i often use it to filter the tonebender since it tames down the tonebenders treble without coloring it too much, it's still fuzzy the MXR is my main distortion 3. gain between 2-4 gives me a cleanish sound to start from, it's a marshallish clean on the edge of break-up bass 6-8 mids 3-5 treble 5-8 master to needed level resonance 12 presence 8-10 depending on how bright the tonebender is (germanium transistors are brighter or duller dependiong on the temp) 4. full on TUBE!! 5. 100W but as above i pull 2 tubes 6. epiphone les paul standard dual buckers SD duncan designed in the neck believe it's a 105, stock epi in the bridge, i normally use the bridge or middle positions, using volume and tone to taste 8. classic metal / acid rock, from led zeppelin to blue cheer and in between |
All times are GMT -4. The time now is 10:38 PM. |
Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.