MrSandMan
03-14-2008, 11:52 PM
I find this amp very interested. It's a four channel metal amp.
FEATURES: All tube technology, no solid state components in signal path. (Midi used to control switching only) 4 channels, midi assignable, Clean, Clean/edge, Rhythm, and Lead.
2 power modes, 100w, 50w, using 2 or 4 power tubes (part of TMS). Gain and Master Volume controls for each channel. 2 sets of EQ control, Bass, Mid and Treble.
2 position Bright switches for the clean channels. 2 position boost switches for dirty channels. A B master volumes, midi assignable, for volume boost in any channel. A B presence and Depth controls, midi assignable to any channel.
Series, Parallel effects loop, with send and return. Internal effects mixing via effects level control, also effects by-pass, midi assignable.
Tube Management System (TMS) Power tube Bias status, indicator leds, Bias adjusting Controls and cathode fuse for each power tube.
Power tube set switches, ie. tubes 1 & 4 on, or 2 & 3 on, or all 4 tubes on, or all 4 off for pre-amp use only.(part of Sherlock Amplifiers T.M.S.).
Parallel speaker output sockets (switchcraft). Speaker Impedance switch, 16, 8, and 4 ohms.
Midi in, Midi through sockets on rear and dedicated foot-switch.
EL34, 6550 or 6L6 power tubes.7 High gain, selected, 12AX7 pre-amp and splitter tubes. Chrome Toggle power and stand-by switches.
All other switches are chrome metal (except impedance switch. All knobs are silver chrome Telecaster type, (21 total). All sockets are metal switchcraft (except send and return). Front panel leds are 3mm clear non-diffused types, colours are green, yellow, blue, red. Optional dedicated foot switch available. RR $3500
http://www.sherlockamps.com/products/headsproducts.htm
Sorry, can't find any sound clips... boo!
FEATURES: All tube technology, no solid state components in signal path. (Midi used to control switching only) 4 channels, midi assignable, Clean, Clean/edge, Rhythm, and Lead.
2 power modes, 100w, 50w, using 2 or 4 power tubes (part of TMS). Gain and Master Volume controls for each channel. 2 sets of EQ control, Bass, Mid and Treble.
2 position Bright switches for the clean channels. 2 position boost switches for dirty channels. A B master volumes, midi assignable, for volume boost in any channel. A B presence and Depth controls, midi assignable to any channel.
Series, Parallel effects loop, with send and return. Internal effects mixing via effects level control, also effects by-pass, midi assignable.
Tube Management System (TMS) Power tube Bias status, indicator leds, Bias adjusting Controls and cathode fuse for each power tube.
Power tube set switches, ie. tubes 1 & 4 on, or 2 & 3 on, or all 4 tubes on, or all 4 off for pre-amp use only.(part of Sherlock Amplifiers T.M.S.).
Parallel speaker output sockets (switchcraft). Speaker Impedance switch, 16, 8, and 4 ohms.
Midi in, Midi through sockets on rear and dedicated foot-switch.
EL34, 6550 or 6L6 power tubes.7 High gain, selected, 12AX7 pre-amp and splitter tubes. Chrome Toggle power and stand-by switches.
All other switches are chrome metal (except impedance switch. All knobs are silver chrome Telecaster type, (21 total). All sockets are metal switchcraft (except send and return). Front panel leds are 3mm clear non-diffused types, colours are green, yellow, blue, red. Optional dedicated foot switch available. RR $3500
http://www.sherlockamps.com/products/headsproducts.htm
Sorry, can't find any sound clips... boo!