PDA

View Full Version : Post your rig


caddy_v_ml
11-12-2009, 03:57 PM
Self explanatory post you rig!

MrSandMan
11-13-2009, 03:43 PM
My current rig is a Marshall 8100, Mesa Boogie Recto 2x12 upright, and a Carparelli S2 Tigerquilt (http://gear-monkey.com/forum/electric-guitar/dotonshaft-carparelli-s2-tigerquilt-t749.0.html)

I don't have any good images of the entire rig right now.... I'll try to get some up soon.

jackal
11-19-2009, 12:09 AM
Right now I am using my Mesa Roadster head with a stilleto slant cab(vintage 30's). A BBE 480i sonic maximizer and a rocktron hush, and for a guitar I have quite a few but I mainly run my ESP LTD Truckster, or if i feel like playing Heavy I got my Dropped C PRS Tremonti.

Pretty straight forward setup but it seems the more i add to it the more i hate my sound I always go back to basics :)

TRoXX
11-20-2009, 06:16 PM
right now, My Fender Strat and My Fender G-Dec(modeling) amp!!

Brian Krashpad
11-25-2009, 07:02 AM
I mix and match a lot.

For my main bad, Crash Pad, that does punk rock and roll, my usual rig is a 90's Sovtek Tube Midget 50W head into an '80's Risson 4x12:

http://img222.imageshack.us/img222/5862/homevanrigsmall.jpg

For my side band I usually use a 1960's Sunn 200S head with the same cab:

http://img.photobucket.com/albums/v26/BrianKrashpad/BooFest05BKwithspareaxes.jpg

However, I have a number of other options available, if I don't feel like messing with a 4x12. For instance, the Sovtek head with a 2x12 open-back cab:

http://img.photobucket.com/albums/v26/BrianKrashpad/Celestion2x12.jpg

Or the Sunn with the same cab:

http://c2.ac-images.myspacecdn.com/images01/79/l_3bb53bfbb7da950d9b088f9c216fe949.jpg

I also have a '60's 1x15 Kustom cab that has been paired with both those heads:

http://c1.ac-images.myspacecdn.com/images01/13/l_08a2e5fc81a5833b71b6a0607ef5feec.jpg

http://img.photobucket.com/albums/v26/BrianKrashpad/101502BKleanBack.jpg

Although I've got a '66 Super Reverb, she's "retired" from gigging except for special occasions. Since that amp was modded to be a 2x10 combo with 2x10 extension cab (see below, to the right), I have also sometimes used the 2x10 combo top with the 2x12 seen previously as the extension cab bottom-- a 2x10/2x12 halfstack.

http://img.photobucket.com/albums/v26/BrianKrashpad/redcrossSDBKair.jpg

In church I use a Super Champ XD as a stage monitor, lined out to a PA head, and into a 1x15 bass cab. Other instruments go direct into the PA head (bass, mandolin, acoustic-electric)

http://www.proguitarshop.com/images/site/FenderAmps/SuperChamp_1.jpg

MetalMac
12-06-2009, 01:22 PM
Currently I have an american standard strat and a squier vintage modified telecaster for electric (really don't like this one need to get rid of it) I also have 3 acoustic guitars. One is a Guild GAD-50 fingerstyle, one is a Epiphone AJ-15 acoustic/electric and one is a custom greg bennett with solid spruce top and solid rosewood back/sides (love that guitar, sounds freakin awesome) My amps currently both suck, I have a Raven RG100 (which is crap) and an epiphone valve junior (which i also don't like, but could be good with some modding, which i have NO clue how to do). I'd really like to unload that telecaster and both amps and try to get one good low wattage amp and find a good pre for my computer to do some home recording stuff. I really don't know much about what to look for in a good home amp and a good interface for my computer. When I bought that telecaster and those amps, I really had no clue what I was doing. Oh well, lesson learned I guess!

Brian Krashpad
12-10-2009, 07:53 AM
MMac, you might like the Super Champ XD. In general I'm not too hot on modeler amps, but this one is actually a real tube amp in combination with DSP amp voicings. I picked mine up like new in a local pawn for $175. Extremely versatile little amp, 15 Watts, 1x10.

http://www.fender.com/themes/products/images/prod_images/amplifiers_addl/2331100000v1_axl.jpg

bsman
12-14-2009, 01:04 PM
Right now, I'm mostly confined to the mancave, and my rig (really simple) consist of a Boss ME-50 into a Fender Pro Jr. and a Crate TX-30 (which I use for acoustic guitar, vocals and to plug my drum machine into). When I play out (which I normally these days only do for work events -- barbecues, holiday parties, etc.) I pretty much use the same stuff and just supplement it with the facility's PA. It's brutally simple, but it works for me...

http://i178.photobucket.com/albums/w277/soccergeezer/P1080636.jpg